Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Levittown
Chimney repair in Levittown usually means one of three things: a failed flue liner, deteriorated mortar joints, or flashing that’s letting water behind the brick. A typical repair runs $450 – $1,800 depending on how deep the damage goes, and most jobs take one day on-site. We work throughout Levittown, from the original Cape Cods near Levittown Memorial to the expanded ranches off Hempstead Turnpike, and we schedule every job with a written price before a single tool comes off the truck. Call (516) 559-6922 for an estimate.
Why Flint Chimney Co Hempstead Is Levittown’s Preferred Chimney Repair Company
We’ve opened hundreds of chimneys in Levittown, and that matters here. The homes in this town share a construction history you won’t find twenty minutes north or south. Most were built between 1947 and 1951 by Levitt & Sons, and the chimneys that came with them were brick veneer, often without a clay liner, and frequently built with a single flue serving both the furnace and the fireplace. That specific setup drives most of the repair calls we take from Levittown homeowners.
Our crews are background-checked and uniformed, so you know exactly who’s walking through your door. Every repair gets a written guarantee valid for a full year, and if a covered repair fails in that window, we return at no charge. Hank Delano runs the operation, and the standard he enforces is the same one every Garrison Partners location follows: the price you approve is the price you pay. No adjustments at the door.
Styles & brands we work with
Chimney Liner Installation in Levittown
Chimney liner installation is the single most common repair we do in Levittown, and the reason goes back to 1947. The original Levitt & Sons homes were built fast, and the chimneys often went up without a proper clay flue liner. The brick was the liner. That was acceptable then. It is not safe now, especially when a wood stove is connected to that chimney. A stainless liner gives the flue a smooth, sealed passage that holds up to creosote and heat, and it brings the system closer to meeting current code.
A DuraFlex stainless liner installed in a Levittown chimney typically runs $1,200 – $2,400, depending on the flue length and whether we’re also replacing the crown or cap. We specify DuraFlex because it’s a proven product we can stand behind for the full year the guarantee covers.
When a Liner Is Non-Negotiable
If your Levittown home has a wood stove tied into the original flue, and that flue has no liner, you have a fire hazard. Creosote from wood smoke settles into the rough brick interior and can’t be fully removed with a brush. We recommend a Level 2 inspection first so you can see the condition on camera before any liner work is priced.
Shared Flues and Code
Many Levittown chimneys were built with one flue serving both the furnace and the fireplace. That’s a code violation by today’s standards. When we find it, the honest fix is to separate the systems, which usually means a stainless liner for the wood stove and a proper cap. We’ll put that recommendation in writing with the inspection photos so you can make a decision on documented evidence, not trust.
Chimney Flashing Repair in Levittown
Chimney flashing repair stops water from getting in where the chimney meets the roof, and in Levittown that joint fails on a predictable schedule. The original flashing was thin and the mortar was mixed soft. After seventy-plus years of freeze-thaw cycles and nor’easter-driven rain, the metal pulls away from the brick and the seal breaks down. Homeowners notice it as a water stain on the ceiling near the fireplace or a damp smell in the attic after a hard storm.
Flashing repair in Levittown typically runs $400 – $950, which includes removing the old material, installing new step and counter flashing, and sealing the joint with a weather-rated sealant. We use Olympia Chimney and Copperfield flashing materials because they’re cut to spec and sized for the brick veneer walls common to Levittown homes.
What Leaks Actually Look Like
Not every flashing leak shows up as a drip. Sometimes the water travels along the joist and shows up six feet from the chimney. Other times it sits in the mortar and causes spalling brick, where the brick face starts flaking off in sheets. A camera inspection of the flashing points usually tells us what’s active and what’s just old staining.
Flashing, Crowns, and the Damper
Water that gets past flashing often rusts out the damper assembly. That’s a common sequence we see on split-levels around Levittown. If the damper is rusted shut or the frame is corroded, we’ll show you the photos and price the damper replacement separately from the flashing, so the quote stays itemized.
Trusted Brands We Service in Levittown
We stock and install professional-grade materials from brands chimney trade pros actually use: DuraFlex stainless liners, Olympia Chimney caps and dampers, Famco flashing components, and Copperfield chase covers. We keep common Levittown sizes on the truck, which means fewer return trips when you’re on a tight schedule. When a part has a brand name behind it, you can look it up and verify what you’re paying for. We’d rather you check than wonder.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Levittown Homes
- Spalling and flaking bricks: Levittown’s humid summers and damp winters push moisture into the soft original brick, and the faces pop off. If you can see flaked brick on the steps or along the chimney base, the freeze-thaw cycle is actively breaking the masonry down.
- Third-degree creosote glaze: Wood stoves run hot and the unlined or poorly lined flues in Levittown’s 1947 – 1951 homes build hard, shiny creosote fast. A brush won’t remove it. It requires mechanical removal or, more often, a liner replacement.
- Missing or cracked chimney crowns: The original crowns were thin and poured with a mix that didn’t stand up. Once the crown cracks, water gets straight into the brick and the flue, and the damage accelerates.
- Rusted damper assemblies from flashing failure: Flashing that lets water in over several winters corrodes the damper frame until it seizes. It’s a common companion to a flashing repair we didn’t get to in time, and it’s fixable without rebuilding the whole chimney.
Pricing for Chimney Repair in Levittown, NY
Here’s a straight answer. A chimney liner installation in Levittown runs $1,200 – $2,400. Flashing repair runs $400 – $950. Chimney crown replacement runs $500 – $1,100. Repointing deteriorated mortar runs $350 – $800 depending on how much of the chimney face is affected. Full chimney rebuilding above the roofline starts around $1,800 and goes up from there. The factors are access, height, and how much brick needs to come down before we can rebuild. Every quote is written and itemized before work starts. Call (516) 559-6922 and we’ll give you a number you can hold us to.
We Also Serve Cities Near Levittown
Our crews cover Levittown and the surrounding towns, including East Meadow, Hicksville, Wantagh, and Seaford. If your home is outside Levittown proper, we can usually schedule a visit within the week. Read more about the full scope of our Chimney Repair services, or see how we work specifically in Levittown.
Serving Levittown, NY - Our Local Coverage Area
We’re based in the Levittown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Levittown
Because the original Levitt & Sons chimneys from 1947 – 1951 were often built without any clay flue liner, and the brick itself was expected to handle the heat and exhaust. That works for a while with an open fireplace, but a wood stove pushes hotter gases and heavier creosote into that rough, unprotected brick. A stainless liner gives the flue a smooth, sealed surface that resists creosote adhesion and contains the heat. If you’re adding a wood stove to a Levittown home built with a bare brick flue, install the liner before the first fire. Call (516) 559-6922 to schedule an inspection and get a written quote.
Yes, and here’s the plain reason: we can’t see the inside of the flue from the roof or the firebox, and neither can you. A Level 2 inspection sends a camera down through the flue so you can see exactly what’s in there: cracks, gaps, missing mortar, or a flue that was never lined in the first place. On Levittown’s original ranches, this is how we confirm the single-flue problem and document it before pricing any repair. The inspection cost comes back as information you can use for years. Call (516) 559-6922 and we’ll schedule it with a written price first.
Every 1 to 2 cords of wood, which for most Levittown homeowners using a stove as primary heat means a sweep every 8 to 12 weeks during the burn season. That’s much more often than the standard yearly recommendation for an open fireplace. Wood stoves burn slower and cooler, so creosote condenses on the flue walls faster, and the unlined chimneys common in Levittown make the problem worse. If you’re burning seasoned oak or ash, you’re in better shape. If you’re burning green wood or pine, shorten the interval. Call (516) 559-6922 and we’ll help you set a sweep schedule that matches your burn rate.
The white staining is efflorescence, which is salt that gets pushed out of the brick when water moves through it and evaporates. It tells you water is inside the masonry, not outside. The flaking is spalling, which happens when that trapped water freezes and expands, popping the brick face off. In Levittown’s damp, freeze-thaw climate, these two show up together, and they mean the chimney needs repointing or, in advanced cases, partial rebuilding. A chimney sweep can’t fix this with a brush. Call (516) 559-6922 and we’ll assess the condition with photos so you can see exactly what’s happening.
Sometimes the flashing is the only problem, especially if the leak starts right after a storm and shows up as a ceiling stain near the chimney. But on Levittown’s older homes, you often have a failing flashing job on top of a cracked crown or spalling brick, because the original construction didn’t separate water from masonry very well. We’ll open the flashing joint and check what’s behind it before we quote. If the crown is intact and the brick is sound, flashing alone gets the job done, typically $400 – $950. If we find more, you’ll see it in photos before any price is finalized. Call (516) 559-6922 for a free assessment.
Written by Hank Delano, Owner at Flint Chimney Co Hempstead, serving Levittown since 2002.