Famco Chimney Repair Nationwide

Famco Chimney Repair in Hempstead: What to Know First

Famco chimney repair in Hempstead typically runs between $225 and $1,800 depending on what’s failed – a mortar repoint on a Famco cap sits at the low end, while a full crown rebuild with waterproofing lands higher. Most Famco-specific jobs in Hempstead are completed within one to two days once we’re on site. We carry the parts that fail most often, so you’re not waiting on backorders.

Call (516) 559-6922

This page is for Hempstead homeowners who have a Famco chimney cap, damper, or chase cover and need straight answers on what’s wrong and what it costs to fix. We’re an independent Famco service provider – not affiliated with or authorized by the manufacturer – and we’ve repaired enough Famco components across Nassau County to know exactly where they fail and what actually holds up. Call (516) 559-6922 and we’ll give you a written quote before any work begins.

How Famco Products Fail – and How We Fix Them

Famco makes solid chimney hardware – caps, dampers, chase covers, and related fittings – but every product line has a pattern. Here’s what we see repeatedly in Hempstead homes:

• Famco top-mount dampers: the cable freeze. On Famco’s cable-operated top damper lines, the stainless cable runs down the flue and exits through a bracket near the firebox. In Hempstead winters, condensation inside the flue wicks down that cable and freezes at the exit point, which either snaps the cable or seizes the damper shut. We replace the cable with the correct gauge and add a drip loop routed away from the exit. That’s a $195-$310 fix, not a full damper replacement.
• Famco multi-flue caps: wind-brace loosening. Larger Famco caps cover multiple flues on older Hempstead colonials. The corner braces that hold the cap to the crown work loose after years of nor’easter wind loads. The cap doesn’t fail structurally – it starts rattling, then lifts at one corner. We re-secure with stainless anchors set into fresh mortar, not the original expansion lugs, which were the weak point. Expect $280-$420 with crown patching included.
• Famco chase covers: pinhole rust at the seams. Famco’s fabricated chase covers are built well, but the welded corners are where Hempstead’s salt air and acid rain eat first. We see pinholes form at the seam welds within 8-12 years depending on exposure. If the substrate is still sound, we weld-repair the seam, re-prime, and apply a rust-inhibiting coating. If it’s compromised, we replace the cover with a fabricated stainless unit cut to the exact outside dimensions. Repair runs $240-$380; replacement is $600-$900 depending on size.
• Famco draft inducers on sidewall vents: motor bearing wear. On Hempstead homes with sidewall-vented oil or gas appliances, Famco draft inducer motors run until the bearings dry out. The symptom is a hum that comes and goes, or intermittent burner lockout. We replace the sealed bearing assembly, which is the weak point, not the entire inducer housing. That’s $320-$480 with labor and parts.
• Famco combustion air inlets: critter intrusion. Famco’s make-up air inlets do their job, but Hempstead squirrels and starlings find the original screen gauge too easy to breach. Once inside, they nest in the air path. We pull the inlet, clean the path, and re-screen with a heavier stainless mesh. $160-$220, and it stops the problem instead of just clearing it.

Our Famco Chimney Repair Process

1. 1
   You call, a person answers. Not a form. Not a callback queue. We ask what the chimney is doing – or not doing – and schedule a window that works for Hempstead traffic realities.
2. 2
   We inspect, photograph, and show you. Every Famco repair starts with a visual inspection and photos. You see exactly what we see before we touch anything. When we can reach everything safely, we stick with the visual. When we need to see more, we use a camera. Either way, nothing is repaired without your sign-off.
3. 3
   Written quote, no exceptions. The price you approve is the price on the invoice. Six items or one, it’s written down first.
4. 4
   Parts decision, stated plainly. Where Famco OEM parts are the right call, we use them. Where a quality aftermarket equivalent outperforms the original spec – the heavier gauge screens, the better cable routing – we tell you why and put it in writing.
5. 5
   The repair and the test. We do the work, then run the functional test: damper throw, cap stability under wind load, inducer draw, smoke test where relevant. If it doesn’t pass, we stay until it does.
6. 6
   The one-year guarantee. Every Famco repair carries our 365-Day Done Right Promise. If it fails within a full year, we return at no charge. Free return visit, no argument.

What Famco Chimney Repair Costs in Hempstead

Here’s the honest range for the Famco work we do most in Hempstead:

• Famco mortar repointing and crown patching: $225-$420, depending on how many feet of joint and crown edge need work.
• Famco cap repair or replacement: $280-$700, depending on single vs. multi-flue and whether the base plate is salvageable.
• Famco chase cover weld-repair: $240-$380, with rust-inhibiting coating included.
• Famco damper cable and bracket replacement: $195-$310.
• Famco draft inducer motor rebuild: $320-$480.
• Full Famco chimney waterproofing: $500-$900 for a standard two-story Hempstead chimney, including prep and two coats of a breathable silane/siloxane-type sealer.

Price moves on access, height, and how much water damage exists behind the first visible layer. A two-story Hempstead colonial with a 45-degree roof pitch costs more than a ranch with a walkable slope. We don’t charge extra for the quote – and we don’t move the quote when the roof turns out steep. The number you approve is the number you pay.

Why Hempstead Homeowners Call Flint Chimney Co Hempstead for Famco Work

We’ve been doing this under the Garrison Partners umbrella since 2002, operating by the same Garrison Code every location follows. That means written pricing before work starts, background-checked uniformed technicians on every call, and a 365-Day Done Right Promise hanging over every Famco repair we make. If it fails, we come back at no charge. That’s not a slogan. It’s a line in the work order.

Hank Delano has run chimney cleaning crews across Nassau County for the better part of two decades, including steady work in the Fulton neighborhood of Hempstead. He’s known for straight answers on liner condition and not quoting work a chimney doesn’t actually need. “The flue tells the truth. You just have to know how to read it.” When a Famco cap isn’t salvageable but the flue’s fine, we’ll tell you that. When we recommend a repair, it’s because the flange, seam, or baffle needs it – not because there’s a commission waiting on the other side.

We don’t service Famco in a vacuum, either. We work with DuraFlex liners, HeatShield resurfacing, and Gelco waterproofing, so if the chimney around your Famco cap is also failing, one crew handles the whole job. That means one written quote, one schedule, one guarantee. Call (516) 559-6922 and we’ll send a technician who knows exactly what he’s looking at.

FAQs