Flue relining
Sweep & inspection
Caps & crowns
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Copperfield Flue Liner Replacement: The Hempstead Owner’s Guide
We install Copperfield-compatible flue liner replacements in Hempstead, and a typical job runs $1,900 to $4,200 installed, depending on the liner size, chimney height, and whether we’re replacing a section or the full run. Most Hempstead homeowners discover the failure three ways: a Level 2 inspection after years of deferred maintenance, an appliance that won’t draft properly, or the visible flaking of clay tile coming down the chimney during a sweep. If you’re seeing any of those, you’re in the right place. Hank Delano has spent the better part of two decades running chimney crews across Nassau County, and the Fulton neighborhood in Hempstead is one we know well. The flue tells the truth. You just have to know how to read it.
Which Copperfield Models This Applies To
Copperfield manufactures chimney liners in a range of diameters and material grades, and the replacement path depends on which you have. Most Hempstead homes with Copperfield liners have either the stainless steel flexible liner in 5.5″, 6″, or 7″ diameter, or an older rigid clay tile system Copperfield distributed regionally in the 1990s and early 2000s. The model is stamped on the liner wall near the top collar, but after ten or fifteen Nassau County winters that stamp is often corroded past reading. What matters more is the inside diameter measurement, which we take during the inspection.
On the OEM-versus-aftermarket question: Copperfield does not sell directly to most independent contractors, and we are an independent service provider, not affiliated with Copperfield. The aftermarket stainless liners we install, primarily from DuraFlex and HeatShield, meet or exceed the specs for Copperfield-compatible applications and carry manufacturer warranties. The compatibility gotcha most owners hit is this: the Copperfield liner’s top plate and rain cap use a specific collar geometry. Not every aftermarket cap matches it. We stock adapters and matching caps, but the one thing you should never do is buy a cap online assuming it fits. We’ve seen too many Hempstead chimneys with a cap balanced on top like a loose lid.
Styles & brands we work with





Signs Your Copperfield Flue Liner Replacement Is Failing
- Flaking clay or metal fragments in the firebox. This is the most common Hempstead presentation. When a liner starts shedding material, the inner wall has already begun losing structural integrity, and the pieces settle at the smoke shelf or the firebox floor.
- Drafting problems on windy days. A cracked liner allows cross-current airflow inside the flue, so the chimney pulls weakly and inconsistently. You’ll notice smoke backing into the room when the wind is up off Long Island Sound.
- Visible rust streaks or staining on the exterior chimney stack. Condensation escaping through liner cracks carries creosote and moisture through the masonry, leaving dark streaks that get worse after rain.
- A smell of soot or smoke in rooms even when there’s no fire. Once the liner is breached, the chimney stops being a sealed exhaust pipe. The house becomes the chimney’s venting path whenever indoor air pressure drops.
- An appliance that burns hot but produces little heat in the room. This is the sneaky one. A leaky liner lets combustion gases and heat escape up the wrong channels, so the stove or fireplace works harder to deliver less.
Replacement Cost & What’s Included
For Hempstead homes, a Copperfield-compatible flue liner replacement typically falls between $1,900 and $4,200 installed. The spread comes down to three factors: the liner diameter and length (a two-story chimney runs 25 to 35 feet, a single-story runs 15 to 20), whether the old liner comes out cleanly or requires breaking up inside the chase, and whether the chimney crown needs resealing around the new top plate.
Every job includes the removal of the failed Copperfield liner, inspection of the surrounding masonry, installation of the new stainless liner with a matching cap, and a camera inspection afterward so you see the run top to bottom. You get a written price before any work starts, and the repair carries our 365-Day Done Right Promise: a written guarantee valid for one full year from the service date, with a free return visit if a covered repair fails. No charge, no argument.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely do: shine a flashlight up the flue with the damper open and look for obvious gaps, flaking, or offset sections. You can also check the exterior stack for cracks in the crown or spalling brick. What you should not do: attempt to pull a liner, patch one, or work from a ladder at chimney height. A failed flue liner is a carbon monoxide and chimney fire risk if the breach goes unaddressed, and working from a roof in Hempstead’s freeze-thaw conditions without staging equipment is how people get badly hurt.
The honest truth is that flue liner replacement is not a weekend project. It requires correct measurements, proper termination, and a camera inspection to confirm the job. Call us at (516) 559-6922 and we’ll give you a straight answer on condition, scope, and price.
FAQs
A stainless Copperfield-compatible liner in Nassau County typically lasts 15 to 25 years. The range depends on how often the appliance is used, what fuel is burned, and whether the chimney cap has kept water out. Hempstead’s humid summers and hard freeze winters accelerate corrosion in liners that run cool or sit unused for months at a time.
Small gaps at the top joint or around the cap can sometimes be resealed, but once the liner wall has thinned, cracked, or begun flaking, patching is not a reliable fix. We will always show you the camera footage so you can see exactly what we’re seeing, and we will tell you plainly if the liner can wait another season or needs replacement now. Call (516) 559-6922 for an honest read.
A standard Copperfield-compatible liner replacement takes one crew one full day. That includes removal of the old liner, the install, the cap fitting, and the camera inspection. If the masonry around the crown needs repair, that adds time, and we’ll put it in the written scope before we start.
We keep DuraFlex and HeatShield stainless liners in the common diameters, 5.5″, 6″, and 7″, plus the matching top plates and caps for Copperfield-style collars, stocked on our trucks. Unusual lengths or custom terminations may require a follow-up visit, and we’ll tell you that up front, in writing, before you commit.
Call Flint Chimney Co Hempstead for Copperfield Flue Liner Replacement
If your Copperfield liner is failing, you want a crew that measures twice, writes the price down, and stands behind the work. That’s how we run every job in Hempstead. We are part of the Garrison Partners family, founded in 2002, and we operate under The Garrison Standard: the number we give you before work starts is the number on the invoice. Technicians are background-checked and uniformed, and a live person answers the phone 24 hours a day. Call (516) 559-6922 for a free estimate on your Copperfield flue liner replacement.
Written by Hank Delano, Owner, Flint Chimney Co Hempstead, serving Hempstead and nearby areas.