Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Flushing
A chimney inspection in Flushing typically runs $149 – $389 depending on the level and whether a camera is used. Most inspections take 60 – 90 minutes on site, and we cover every Flushing neighborhood from Murray Hill to Broadway-Flushing, Kissena Park to Auburndale. The salt air off Flushing Bay eats through flashing and caps faster than most homeowners expect, so a visual check that would pass an inland chimney often misses corrosion that’s already underway here. Call (516) 559-6922 to book an inspection with a crew that knows Flushing’s rowhouse stock and high-rise boiler flues.
Why Flint Chimney Co Hempstead Is Flushing’s Preferred Chimney Inspection Company
Our crews inspect chimneys in Flushing every week, and we’ve learned what this housing stock does over time. The prewar brick rowhouses that run from Northern Boulevard down toward Franklin Avenue share chimney stacks between attached homes, which means an inspection on your side isn’t telling the whole story. The multi-family conversions near Main Street and Roosevelt Avenue have multiple flues inside one masonry chase, and each flue serves a separate heating system. That kind of work takes a trained eye, not a checklist.
Hank Delano runs our inspection crews, and he’s been walking Flushing roofs through nor’easter seasons long enough to know what salt air does to a crown. Our technicians arrive in uniform, background-checked, and they hand you a written price before a single tool comes off the truck. The 365-Day Done Right Promise means if our inspection misses something we should have caught, we return at no charge. That’s the Garrison Standard: the same code every Garrison Partners location follows.
We dispatch from our New York City office, which puts Flushing calls within a short drive. A live person answers the phone 24/7, so when you call (516) 559-6922 you’re talking to someone who can schedule you, not a voicemail tree.
Styles & brands we work with
Chimney Camera Inspection in Flushing
Chimney Camera Inspection is the service we recommend most for Flushing rowhouses, because the flues here often hide problems you can’t see from the roof or the firebox. A camera inspection puts a probe down the flue and records the interior liner condition in real time. In Flushing, where many chimneys are shared or contain multiple flues serving separate boilers, the camera is the only way to see spalling, gaps, or third-degree creosote glaze inside a liner that runs between two units.
A camera inspection in Flushing typically runs $249 – $389 depending on flue length and access. You get a written report with still images, so you’re not taking anyone’s word for what’s inside your chimney. If you’re buying or selling in Flushing, a camera inspection is the difference between a clean transaction and a surprise liner replacement two months after closing.
Shared Chimney Mapping
When one owner in an attached Flushing rowhouse relines only their side for a high-efficiency boiler, the shared flue can develop pressure imbalances. The camera shows us exactly where one flue ends and the neighbor’s begins, so we can document drafting problems before they push exhaust into the unlined side.
Pre-Listing Real Estate Inspections
Flushing’s housing market moves fast, and buyers increasingly request camera documentation before closing. We inspect chimneys for real estate transactions and provide a written report with images that holds up in a negotiation. If the camera finds creosote or liner damage, you know before the buyer does.
Fireplace Inspection in Flushing
Fireplace Inspection in Flushing means checking the firebox, damper, smoke chamber, and the first section of flue for anything that could ignite or leak. Many Flushing homes built before 1940 have fireplaces that were converted to gas or sealed off entirely, and the abandoned flue often gets skipped by generic inspections. Sealing off a fireplace without inspecting the flue leaves third-degree creosote deposits in place, and during a nor’easter’s downdraft those deposits can ignite.
A standard fireplace inspection in Flushing runs $149 – $249. If the fireplace hasn’t been used in years, we add a camera pass to check the abandoned flue for debris, creosote, and animal nests. That’s an additional $100 – $150, and it’s the only way to know a sealed fireplace is actually safe.
Gas Insert and Conversion Checks
When a Flushing rowhouse converts a wood fireplace to gas, the flue still needs to vent combustion gases. We check the damper setting, the liner condition, and the termination cap to make sure exhaust is leaving the house and not pooling in the flue.
Fireplace Damper and Cap Condition
Salt air from Flushing Bay corrodes dampers faster here than in Queens neighborhoods further inland. A fireplace inspection should always include the damper and cap, because a rusted-open damper lets heat escape all winter and a rusted-shut damper traps carbon monoxide.
Trusted Brands We Service in Flushing
When a Flushing chimney needs components, we install what the conditions demand, not what’s cheapest to stock. HeatShield resurfacing is our standard answer for spalled clay-tile liners, because it restores the flue without a full teardown. For caps and flashing within a mile of Flushing Bay, we specify stainless steel over galvanized every time. Gelco and Olympia Chimney components show up regularly on our Flushing trucks, and Famco caps and dampers are what we reach for on coastal rowhouses. Parts for common Flushing chimney systems are on hand locally, so we’re not waiting on a warehouse to finish your inspection.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Inspection Problems We See in Flushing Homes
- Corroded caps and flashing within 5 – 7 years. The salt air from Flushing Bay pits galvanized steel quickly. A cap that looks fine from street level is often rusted through at the seams, and the water it’s letting in is spalling the crown beneath it.
- Shared chimney pressure imbalances in attached rowhouses. When one side of a Murray Hill or Broadway-Flushing rowhouse relines and the other doesn’t, exhaust can push into the unlined flue. We see carbon monoxide readings on the unlined side that the neighbor never knew about.
- Abandoned flues with hidden creosote. Many Flushing homes sealed off fireplaces decades ago without ever cleaning the flue. That creosote is still in there, and a nor’easter downdraft is all it takes to ignite it.
- Deteriorated mortar crowns on prewar brick chimneys. Flushing’s damp winters and freeze-thaw cycles crack crowns fast. Once water gets into the crown, the bricks below start spalling, and a simple cap replacement turns into a full crown rebuild.
Pricing for Chimney Inspection in Flushing, NY
A Level 1 visual inspection in Flushing runs $149 – $199. A Level 2 inspection with camera documentation runs $249 – $389, and that’s the level we recommend for real estate transactions, gas conversions, or any chimney that hasn’t been looked at in three or more years. A Level 3 inspection, which involves opening up masonry to access concealed flue sections, runs $500 – $1,200 depending on scope.
What moves the price in Flushing: shared chimneys take longer to access, rooftop bulkhead entry on high-rise co-ops adds time, and older rowhouses with multiple flues require more camera passes. You get a written quote before any work starts, and the invoice matches the quote, every time. Call (516) 559-6922 for a free estimate.
We Also Serve Cities Near Flushing
Our crews cover Flushing and the surrounding area, including Jamaica, Hempstead, Rockville Centre, and Westbury. If you’re just outside Flushing, our Chimney Inspection team can still reach you quickly, and the same written pricing and guarantee applies. We know the housing stock and salt-air wear patterns across this part of Queens and Nassau County, so the inspection you get in Chimney Inspection in Flushing is the same standard we bring everywhere else.
Serving Flushing, NY - Our Local Coverage Area
We’re based in the Flushing area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Flushing
Every 12 months. Flushing’s salt air from Flushing Bay corrodes caps, flashing, and dampers at a faster rate than inland Queens, so the annual interval is what actually catches rust before it becomes a leak. If you’re within a mile of the bay, or your rowhouse shares a chimney with an attached neighbor, annual inspection is the minimum we recommend. Call (516) 559-6922 to schedule, and we’ll put the inspection on a reminder cycle so you don’t have to track it.
Yes, you need an inspection on your side, because relining one flue in a shared chimney can create pressure imbalances that push exhaust into the unlined side. This is a specific problem we see in Murray Hill and Broadway-Flushing rowhouses, where pre-1930 chimneys often run unlined or with original clay tile. A camera inspection maps the shared flue and shows whether your side is drafting safely or pulling in your neighbor’s exhaust. The cost to document this is $249 – $389, and it’s the only way to know you’re not breathing carbon monoxide from next door.
Galvanized caps in Flushing start pitting within 5 – 7 years because of the salt air; stainless steel caps last decades, which is why we specify stainless on every coastal rowhouse. A galvanized cap that’s rusted through lets water into the flue, and the spalling that follows turns a $300 cap replacement into a $1,200 – $2,500 crown rebuild. If the cap is within a mile of Flushing Bay, we recommend marine-grade stainless, and we’ll show you the corrosion comparison before you buy anything.
Yes, a camera inspection shows the exact thickness and grade of creosote inside the flue, including third-degree glaze that forms in Flushing’s converted multi-flue systems. Creosote fires don’t announce themselves; the first sign is often the fire itself. Our camera pass documents the smoke chamber and flue liner, and if we find glaze, we recommend the sweep and any resurfacing needed before you light another fire. Call (516) 559-6922 and we’ll walk you through what the camera shows, image by image.
Flushing’s humid continental climate combines damp winters, freeze-thaw cycles, and salt air from the bay, which expands and contracts the mortar until it cracks and spalls. Once the crown is cracked, water enters the brick below, and the repairs get more expensive every season. We inspect the crown on every Flushing chimney and quote a repair range before work starts, typically $600 – $1,500 for a standard rowhouse crown. Ask for Hank Delano when you call (516) 559-6922, and he’ll explain exactly what your crown needs and what can wait.
Call (516) 559-6922 for a free estimate on chimney inspection in Flushing. A live person answers around the clock, and you’ll get a written price before any work begins.
Written by Hank Delano, Owner at Flint Chimney Co Hempstead, serving Flushing since 2002.